Product: NPort Linux Real TTY Driver (V2) Version: 1.16 Build 09010515 Date: 01/05/2009 Company: Moxa Inc. Release Note: ============= ver1.16 (01/05/2009) 1. VR 2. Support Linux kernel up to 2.6.27(Ubuntu 8.10). 3. New: Support linear baudrate. Run 3 steps to set customed baudrate: (E.g., /dev/ttyr00, baudrate 500K) (1) /bin/setserial /dev/ttyr00 spd_cust (2) /bin/setserial /dev/ttyr00 divisor 1 (3) /bin/setserial /dev/ttyr00 baud_base 500000 Run 1 step to recover to normal mode: (1) /bin/setserial /dev/ttyr00 divisor 0 4. Bugfix: Compile failed for kernel v2.6.21 platform. 5. Support Linux kernel up to 2.6.26. ver1.15.9 (11/17/2008) 1. Support Linux kernel up to 2.6.27(Ubuntu 8.10). ver1.15.7 (9/24/2008) 1. New: Support linear baudrate. Run 3 steps to set customed baudrate: (E.g., /dev/ttyr00, baudrate 500K) (1) /bin/setserial /dev/ttyr00 spd_cust (2) /bin/setserial /dev/ttyr00 divisor 1 (3) /bin/setserial /dev/ttyr00 baud_base 500000 Run 1 step to recover to normal mode: (1) /bin/setserial /dev/ttyr00 divisor 0 ver1.15.5 (9/11/2008) 1. Bugfix: Compile failed for kernel v2.6.21 platform. Ver1.15.3 (7/30/2008) 1. Support Linux kernel up to 2.6.26. Ver1.15 (4/22/2008) 1. New: Support IPv6 (kernel 2.6.x). Ver1.14.13 (3/3/2008) 1. Support Linux kernel up to 2.6.24.11 (Ubuntu 8.04). Ver1.14.11 (2/11/2008) 1. Support Linux kernel up to 2.6.23.14 (Fedora 8). Ver1.14.3 (8/29/2007) 1. Bugfix: Multi-connection mode caused connection disconnected abnormally. Ver1.14.1 (7/29/2007) 1. Bugfix: Compile failed for kernel v2.4.x at x64 platform. 2. Bugfix: Buffers are not cleared after ports are closed. Ver 1.14 (6/26/2007) 1. Official release. 2. New: support 32 port model. 3. Bugfix: local buffer isn't cleared when port is closed. Ver 1.13.11 (5/3/2007) 1. Bugfix: install error in kernel 2.6.15. Ver 1.13.9 (3/30/2007) 1. Bugfix: the npreal2d disappeared in big-endian machine. Ver 1.13.7 (2/15/2007) 1. Support Linux kernel up to 2.6.20. Ver 1.13.5 (2/9/2007) 1. Bugfix: tcdrain() function caused application halted when network is disconnected. Ver 1.13.3 (2/1/2007) 1. Fixed PowerPC64 builds problem. Ver 1.13.1 (12/11/2006) 1. Fixed DCD off problem. 2. Fixed can not include 64-bits libssl.so problem. Ver 1.13 (11/17/2006) 1. Official release. 2. Support Secure RealCOM operating mode at NPort 6000 series. Ver 1.12.9 (11/17/2006) 1. Fixed stack smashing detected problem. Ver 1.12.7 (10/18/2006) 1. Support Linux kernel up to 2.6.18.1. 2. Modify flush mechnism for closing port problem. Ver 1.12.5 (9/8/2006) 1. Add null pointer checking in npreal_net_write() to prevent from accessing invalid address. Ver 1.12.3 (7/12/2006) 1. Support Linux kernel up to 2.6.17. Ver 1.12.1 (3/22/2006) 1. bugfix: Npreal2d disappeared. Ver 1.12 (2/23/2006) 1. Offical release. 2. new: Add termio CMSPAR option. Now the driver supports MARK and SPACE parity checks. 3. bugfix: Use access_ok() instead of verify_ok(), since it is obsolete in 2.6.x kernel. Ver 1.11.11 (12/08/2005) 1. new: Add npreal2 tools source code into the package. 2. bugfix: clean up data kept in internal buffer of Real TTY driver when the tty port is closed to prevent from receiving unexpected data in the following open. 3. bugfix: enlarge buffer size of ttyname[] array to prevent from invalid memory access error in the Linux distributions where long tty names are used. Ver 1.11.9 (11/21/2005) 1. bugfix: Fixed compilation error on all v2.6.x versions. Ver 1.11.7 (11/09/2005) 1. bugfix: Added null pointer checkings to prevent from invalid memory access in SMP platforms. 2. bugfix: Fixed ioctl::TIOCMIWAIT bug which causes the calling process halt. 3. bugfix: Added ASYNC_CLOSING checking to prevent race condition on closing port in SMP platforms. 4. new: Add debug print management. 5. bugfix: Incorrect working directory is returned when reading configuration file. Read configuration may fail. 6. bugfix: Alive check should verify both data channel and command channel to make disconnection timeout checking more accurate. Ver 1.11.5 (9/13/2005) 1. bugfix: original put_to_user() declaration will cause type mismatch in 64-bit platform. Modify the delaration to make it work witn both 32-bit Linux and 64-bit Linux. Ver 1.11.3 (9/5/2005) 1. bugfix: When user changes system time, connection timeout machanism may not work correctly. The connection may be teared down right away, or never disconnected. Ver 1.11.1 (8/24/2005) 1. Support 64-bit Linux. 2. new: Support TCXONC command of ioctl(). The supported arg values are TCOOFF and TCOON. Ver 1.11 (7/25/2005) 1. Offical release. 2. new: Support NPort IA model. Ver 1.10.7 (7/13/2005) 1. bugfix: module use count might be incorrectly decremented in SMP platforms. 2. bugfix: Wait for port shutdown command to complete before returning to user code. This is to ensure closing port successfully. Ver 1.10.5 (7/8/2005) 1. bugfix: Don't block on close when open operation is non-blocking mode. 2. bugfix: ioctl of serial info won't work for closing_wait option on value ASYNC_CLOSING_WAIT_NONE. Ver 1.10.3 (6/7/2005) 1. bugfix: Modified parameters of npreal_write() to support kernel version 2.6.10 and above. Ver 1.10.1 (5/31/2005) 1. feature: Close network connections when closing tty ports. Ver 1.10 (4/22/2005) 1. Further verified the supported Moxa products. 2. Support Linux kernel version 2.4.x to 2.6.9. 3. Bug fixed: Warning message occurs with ppp dialout case. 4. Bug fixed: With kernel 2.4, try to ping a packet larger than 4KB via ppp dialout caused Linux to hang. Ver 1.9 (3/2/2005) 1. Bug fixed: server index of ttyinfo table is not correct. Connection might be down incorrectly. Ver 1.8 (2/22/2005) 1. Bug fixed: Open might be slow or failed. 2. Bug fixed: Warning message occurs when adding/removing nodes in Fedora Core3. 3. Add Slackware support (Kernel version 2.4.x). 4. Bug fixed: /dev/ttyr?? nodes might be deleted after system reboot in some Linux kernel 2.6.x. Ver 1.7 (12/31/2004) 1. Support ASPP baud rate error detection. 2. Modified DSCI netstat command: using little endian for max_socket field. 3. Add new product NPort 5110 into README.TXT and VERSION.TXT. 4. Fix bug: ap_id field is 4 byte long. Use ntohl() and htonl() to convert between host and network format. 5. Add alive check mechanism for MOXA products which support DSCI commands (get net state). 6. Modified alive check to support multiple connections. Ver1.6 1. Support Linux kernel 2.6. 2. Callout device (cur*) is obsolete under Linux 2.6. Ver1.5 1. Support NE-4100T, NE-4110S, NE-4120S, NE-4110A, NE-4120A. Ver1.4.1 1. Fix compatible problem with Real TTY driver V1 (ver1.1/1.2). Ver1.4 1. Support CN2510-8, CN2510-16, CN2610-8, CN2610-16. 2. Fix compiling error: request for member `counter' in something not a structure or union. Except Fedora, this is encounterd on any distribution with kernel version >= 2.4.22. (Bug#33) 3. Fix compiling error on Red Hat 7.2: The MODULE_LICENSE is not defined. (Bug#5) -End-