Remote Access for SATURN-PLC controller
Usage: rasat.exe [OPTIONS] [FILE_NAME]

Select operation:
  -t, --type=TYPE            type of operation, where TYPE is:
                             'find'     - broadcast searching
                             'fbd'      - upload fbd program from FILE_NAME
                             'clone'    - download fbd program to FILE_NAME
                             'cs'       - upload c-script program from FILE_NAME (only via eth)
                             'csclone'  - download c-script program to FILE_NAME (only via eth)
                             'firmware' - upload firmware from FILE_NAME

Broadcast searching options:
  --baddr=IP                 broadcast IP address (default 255.255.255.255)

MODBUS options:
  -a, --addr=NUM             slave MODBUS address (default 48)

For UDP/Modbus/TCP connection:
  -i, --ip=<IP>              IP-address
  -p, --port=NUM             use Modbus/TCP port NUM (default 502)

For MODBUS/RTU connection:
  -s, --serial=COMn          serial port
  -b, --baudrate=NNN         baud rate: 9600,19200,38400,57600,115200(default)
      --parity=PAR           parity check, where PAR is: none(default),odd or even

Miscellaneous:
  -v, --verbose              verbose output
  -f, --force                force overwrite output file
  -V, --version              display version information and exit
  -h, --help                 display this help text and exit
      --license              display license text and exit

Examples:
  rasat  -t find                                # broadcast network searching
  rasat  -t find --baddr=192.168.1.255          # broadcast network searching
  rasat  -t fbd -i 192.168.1.100 test.fbdbin    # upload fbd program via ethernet
  rasat  -t fbd -s com1 test.fbdbin             # upload fbd program via RS-485
  rasat  -t clone -i 192.168.1.100 test.fbdbin  # clone fbd program via ethernet to file
  rasat  -t cs -i 192.168.1.100 test.prog       # upload c-script program via ethernet
  rasat  -t csclone -i 192.168.1.100 test.prog  # clone c-script program via ethernet to file